Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: minor format change

...

 To enable and start the openvswitch-vtep service, run the following command:

 

Code Block
languagetext
cumulus@switch$cumulus@switch:~$ sudo systemctl enable openvswitch-vtep.service
cumulus@switch$cumulus@switch:~$ sudo systemctl start openvswitch-vtep.service
Note

In previous versions of Cumulus Linux, you had to edit the /etc/default/openvswitch-vtep file and then start the openvswitch-vtep service. Now, you just have to enable and start the openvswitch-vtep service.

Configure the MidoNet Integration Using the Configuration Script

...