Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: changed headings (from gerund)

...

Expand
titleThis topic describes ...

Table of Contents
maxLevel3
excludeContents

...

Configure the REST API

  1. Configure the relevant settings in /etc/restapi.conf:

    Code Block
    languagetext
    [ML2]
    #local_bind = 10.40.10.122
    #service_node = 10.40.10.1
    
    # Add the list of inter switch links that
    # need to have the vlan included on it by default
    # Not needed if doing Hierarchical port binding
    #trunk_interfaces = uplink
  2. Restart the REST API service for the configuration changes to take effect:

    Code Block
    languagetext
    cumulus@switch:~$ sudo systemctl restart restserver

Additional REST API calls have been added to support the configuration of bridge using the bridge name instead of network ID.

...

Install and

...

Configure the Cumulus Networks Modular Layer 2 Mechanism Driver

You need to install the Cumulus Networks ML2 mechanism driver on your Neutron host, which is available upstream:

...