Out of Date Information!

This documentation is for Cumulus Linux 3.3.2, which is an older version of the software. If you are using the current version of Cumulus Linux, this content may not be up to date. The current version of the documentation is available here: Network Command Line Utility. (If this link does not take you to the correct page, that page may have been renamed or deleted. Try navigating from the main page of the current documentation.)

The Network Command Line Utility, or NCLU, is a command line interface for Cumulus Networks products, implemented in Cumulus Linux and VX 3.1 and later releases, with the goal of simplifying the networking configuration process for all users.

NCLU resides in the Linux user space, as seen below. It provides consistent access to networking commands directly via bash, thereby making configuration and troubleshooting simple and easy — no need to edit files or enter modes and sub-modes. In addition, NCLU does more than traditional command line interfaces by:

  • Embedding help, examples and automatic command checking with suggestions in case you’ve entered a typo
  • Running directly from and integrating with bash, while being interoperable with the regular way of accessing underlying configuration files and automation
  • Automatically configuring dependent features so you don’t have to

The NCLU wrapper utility is called netnet is capable of configuring L2 and L3 features of the networking stack, installing ACLs and VXLANs, rolling back and deleting snapshots, as well as providing monitoring and troubleshooting functionality for these features. /etc/network/interfaces and /etc/quagga/Quagga.conf can both be configured with net, in addition to running show and clear commands related to ifupdown2 and Quagga.


 This chapter covers ...

What's New and Different in NCLU in Version 3.3?

A number of commands have been added, updated, or removed from NCLU in the new release. Read more about what's changed.

Installing NCLU

If you upgraded Cumulus Linux from a version earlier than 3.2 instead of performing a full binary install, you need to install the nclu package on your switch:

cumulus@switch:~$ sudo -E apt-get update
cumulus@switch:~$ sudo -E apt-get install nclu
cumulus@switch:~$ sudo -E apt-get upgrade

The  nclu package installs a new bash completion script, and displays the following message when it is manually installed:

Setting up nclu (1.0-cl3u3) ...
To enable the newly installed bash completion for nclu in this shell, execute...
 source /etc/bash_completion

Getting Started

NCLU uses the following workflow for staging and committing changes to Cumulus Linux:

  1. Use the net add and net del commands to stage/remove configuration changes.

  2. Use the net pending command to review staged changes.

  3. Use net commit and net abort to commit/delete staged changes.

net commit applies the changes to the relevant configuration files, such as /etc/network/interfaces, then runs necessary follow on commands to enable the configuration, such as ifreload -a.

Once you have a running configuration, you can review and update it using:

  • net show: A series of commands for viewing various parts of the network configuration, such as net show configuration, net show commit history and net show bgp to view the complete network configuration, a history of commits using NCLU and BGP status, respectively.
  • net clear: A way to clear net show counters, BGP and OSPF neighbor content, and more.
  • net rollback: Provides a mechanism to revert back to an earlier configuration.
  • net commit confirm: Requires the user to press Enter in order to commit changes via NCLU. If you run net commit confirm but do not press Enter within 10 seconds, the commit is automatically reverted and nothing changes.
  • net del all: Deletes all configurations and stops the IEEE 802.1X service.

    This command does not remove management VRF configurations, as NCLU does not interact with eth0 interfaces and management VRF at all.

Tab Completion, Verification and Inline Help

NCLU provides a number of features to assist users. In addition to tab completion and partial keyword commands identification, verification checks are set in place to ensure correct syntax is used. The examples below show the output for incorrect commands:

cumulus@switch:~$ net add bgp router-id
ERROR: Command not found

Did you mean one of the following?

    net add bgp router-id <ipv4>
        This command is looking for an IP address, not an IP/prefixlen

cumulus@switch:~$ net add bgp router-id
cumulus@switch:~$ net add int swp10 mtu <TAB>
    <552-9216> : 
cumulus@switch:~$ net add int swp10 mtu 9300
ERROR: Command not found
Did you mean one of the following?
    net add interface <interface> mtu <552-9216>

NCLU has a comprehensive help system built in to assist usage. In addition to the net man page, you can use ? and help to display available commands:

cumulus@switch:~$ net help

    # net <COMMAND> [<ARGS>] [help]
    # net is a command line utility for networking on Cumulus Linux switches.
    # COMMANDS are listed below and have context specific arguments which can
    # be explored by typing "<TAB>" or "help" anytime while using net.
    # Use 'man net' for a more comprehensive overview.

    net abort
    net commit [verbose] [confirm] [description <wildcard>]
    net commit delete (<number>|<number-range>)
    net help [verbose]
    net pending
    net rollback (<number>|last)
    net show commit (history|<number>|<number-range>|last)
    net show rollback (<number>|last)
    net show configuration [commands|files|acl|bgp|ospf|ospf6|interface <interface>]


    # Help commands
    help     : context sensitive information; see section below
    example  : detailed examples of common workflows

    # Configuration commands
    add      : add/modify configuration
    del      : remove configuration

    # Commit buffer commands
    abort    : abandon changes in the commit buffer
    commit   : apply the commit buffer to the system
    pending  : show changes staged in the commit buffer
    rollback : revert to a previous configuration state

    # Status commands
    show     : show command output
    clear    : clear counters, BGP neighbors, etc

cumulus@switch:~$ net help bestpath
The following commands contain keyword(s) 'bestpath'

    net (add|del) bgp bestpath as-path multipath-relax [as-set|no-as-set]
    net (add|del) bgp bestpath compare-routerid
    net (add|del) bgp bestpath med missing-as-worst
    net (add|del) bgp vrf <text> bestpath as-path multipath-relax [as-set|no-as-set]
    net (add|del) bgp vrf <text> bestpath compare-routerid
    net (add|del) bgp vrf <text> bestpath med missing-as-worst
    net add bgp debug bestpath <ip/prefixlen>
    net del bgp debug bestpath [<ip/prefixlen>]
    net show bgp (<ipv4>|<ipv4/prefixlen>) [bestpath|multipath] [json]
    net show bgp (<ipv6>|<ipv6/prefixlen>) [bestpath|multipath] [json]
    net show bgp vrf <text> (<ipv4>|<ipv4/prefixlen>) [bestpath|multipath] [json]

Multiple interfaces can be configured at once:

cumulus@switch:~$ net add int swp7-9,12,15-17,22 mtu 9216

Adding ? (Question Mark) Ability to NCLU

While tab completion is enabled by default, you can also configure NCLU to use the ? (question mark character) to look at available commands. To enable this feature for the cumulus user, open the following file:

cumulus@leaf01:~$ sudo nano ~/.inputrc

Uncomment the very last line in the .inputrc file so that the file changes from this:

# Uncomment to use ? as an alternative to 
# ?: complete

to this:

# Uncomment to use ? as an alternative to 
 ?: complete

Save the file and reconnect to the switch. The ? (question mark) ability will work on all subsequent sessions on the switch.

cumulus@leaf01:~$ net
    abort     :  abandon changes in the commit buffer
    add       :  add/modify configuration
    clear     :  clear counters, BGP neighbors, etc
    commit    :  apply the commit buffer to the system
    del       :  remove configuration
    example   :  detailed examples of common workflows
    help      :  Show this screen and exit
    pending   :  show changes staged in the commit buffer
    rollback  :  revert to a previous configuration state
    show      :  show command output

When the question mark is typed, NCLU will autocomplete and show all available options, but the question mark won't actually appear on the terminal. This is normal, expected behavior.

Built-In Examples

The NCLU has a number of built in examples to guide users through basic configuration setup:

cumulus@switch:~$ net example 
    acl              :  access-list
    bgp              :  Border Gateway Protocol
    bond             :  Bond, port-channel, etc
    bridge           :  A layer2 bridge
    clag             :  Multi-Chassis Link Aggregation
    dot1x            :  Configure, Enable, Delete or Show IEEE 802.1X EAPOL
    link-settings    :  Physical link parameters
    lnv              :  Lightweight Network Virtualization
    management-vrf   :  Management VRF
    mlag             :  Multi-Chassis Link Aggregation
    ospf             :  Open Shortest Path First (OSPFv2)
    vlan-interfaces  :  IP interfaces for VLANs

cumulus@switch:~$ net example bridge 

We are configuring switch1 and would like to configure the following
- configure switch1 as an L2 switch for host-11 and host-12
- enable vlans 10-20
- place host-11 in vlan 10
- place host-12 in vlan 20
- create an SVI interface for vlan 10
- create an SVI interface for vlan 20
- assign IP to the SVI for vlan 10
- assign IP to the SVI for vlan 20
- configure swp3 as a trunk for vlans 10, 11, 12 and 20
     *switch1 --------- switch2
  swp1 /  \ swp2
      /    \
     /      \
 host-11   host-12

switch1 net commands
- enable vlans 10-20
switch1# net add vlan 10-20
- place host-11 in vlan 10
- place host-12 in vlan 20
switch1# net add int swp1 bridge access 10
switch1# net add int swp2 bridge access 20
- create an SVI interface for vlan 10
- create an SVI interface for vlan 20
- assign IP to the SVI for vlan 10
- assign IP to the SVI for vlan 20
switch1# net add vlan 10 ip address
switch1# net add vlan 20 ip address
- configure swp3 as a trunk for vlans 10, 11, 12 and 20
switch1# net add int swp3 bridge trunk vlans 10-12,20
# Review and commit changes
switch1# net pending
switch1# net commit

switch1# net show interface
switch1# net show bridge macs

Adding More NCLU Users or Groups

If you've created custom users or groups on your Cumulus Linux switches, you can configure those users to be able to run NCLU commands. 

To do so, edit the /etc/netd.conf file, and add those users to the users_with_edit and users_with_show lines in the file, then save the file.

For example, if you want the user netoperator to be able to run both edit and show commands, add the user to the users_with_edit and groups_with_edit lines in the /etc/netd.conf file:

cumulus@switch:~$ sudo nano /etc/netd.conf
# Control which users/groups are allowed to run 'add', 'del',
# 'clear', 'net abort', 'net commit' and restart services (quagga, etc)
# to apply those changes
users_with_edit = root, cumulus, netoperator
groups_with_edit = root, cumulus

# Control which users/groups are allowed to run 'show' commands
users_with_show = root, cumulus, netoperator
groups_with_show = root, cumulus

Similarly, to configure a new user group to use NCLU, add that group to the groups_with_edit and groups_with_show lines in the file.

Take care to which groups you want to give the groups_with_edit permission. For example, you wouldn't want to give it to the tacacs group.

Restarting the netd Service

Whenever you modify netd.conf, you must restart the netd service for the changes to take effect:

cumulus@switch:~$ sudo systemctl restart netd.service

Backing up the Configuration to a Single File

You can easily back up your NCLU configuration to a file by outputting the results of net show configuration commands to a file, then retrieving the contents of the file using the source command. You can then view the configuration at any time or copy it to other switches and use the source command to apply that configuration to those switches. 

For example, to copy out the configuration of a leaf switch called leaf01, you would run something like the following:

cumulus@leaf01:~$ net show configuration commands >> leaf01.txt

With the commands all stored in a single file, you can now copy this file to another ToR switch in your network called leaf01 and apply the configuration by running:

cumulus@leaf01:~$ source leaf01.txt

Advanced Configuration

NCLU needs no initial configuration; it's ready to go in Cumulus Linux. However, if you need to modify its configuration, you must manually update the /etc/netd.conf file. This file can be configured to allow different permission levels for users to edit configurations and run show commands. It also contains a blacklist that hides less frequently used terms from the tabbed autocomplete. 

Configuration Variable

Default Setting




When true, displays the Linux command running in the background.



Enables net wrapping of ifupdown2 commands.



Enables net wrapping of Quagga commands.


root, cumulus

Sets the Linux users with root edit privileges.


root, cumulus

Sets the Linux groups with root edit privileges.

users_with_showroot, cumulusControls which users are allowed to run show commands.
groups_with_showroot, cumulusControls which groups are allowed to run show commands.


address-purge, bond-ad-actor-sys-prio, bond-ad-actor-system, bond-mode, bond-num-grat-arp, bond-num-unsol-na, bond-use-carrier, bond-xmit-hash-policy, bridge-bridgeprio, bridge-fd, bridge-hashel, bridge-hashmax, bridge-hello, bridge-maxage, bridge-maxwait, bridge-mclmc, bridge-mclmi, bridge-mcmi, bridge-mcqi, bridge-mcqpi, bridge-mcqri, bridge-mcrouter, bridge-mcsqc, bridge-mcsqi, bridge-pathcosts, bridge-port-pvids, bridge-port-vids, bridge-portprios, bridge-stp, bridge-waitport, broadcast, hwaddress, link-type, mstpctl-ageing, mstpctl-fdelay, mstpctl-forcevers, mstpctl-hello, mstpctl-maxage, mstpctl-maxhops, mstpctl-portp2p, mstpctl-portpathcost, mstpctl-portrestrrole, mstpctl-portrestrtcn, mstpctl-treeportcost, mstpctl-treeportprio, mstpctl-txholdcount, netmask, preferred-lifetime, scope, vxlan-ageing, vxlan-learning, up, down, bridge-ageing, bridge-gcint, bridge-mcqifaddr, bridge-mcqv4src

Hides corner case command options from tab complete, to simplify and streamline output.

Net Tab Complete Output

net provides an environment variable for setting where the net output is directed. To only use stdout, set the NCLU_TAB_STDOUT environment variable to true. The value is not case sensitive.