This documentation is for an older version of the software. If you are using the current version of Cumulus Linux, this content may not be up to date. The current version of the documentation is available here. If you are redirected to the main page of the user guide, then this page may have been renamed; please search for it there.

User Accounts

By default, Cumulus RMP has two user accounts: root and cumulus.

The cumulus account:

  • Default password is CumulusLinux!

  • Is a user account in the sudo group with sudo privileges

  • User can log in to the system via all the usual channels like console and SSH

  • Along with the cumulus group, has both show and edit rights for NCLU

The root account:

  • Default password is disabled by default

  • Has the standard Linux root user access to everything on the switch

  • Disabled password prohibits login to the switch by SSH, telnet, FTP, and so forth

For best security, you should change the default password (using the passwd command) before you configure Cumulus RMP on the switch.

You can add more user accounts as needed. Like the cumulus account, these accounts must use sudo to execute privileged commands, so be sure to include them in the sudo group.

To access the switch without any password requires booting into a single shell/user mode.

Enabling Remote Access for the root User

As mentioned above, the root user does not have a password set for it, and it cannot log in to a switch via SSH. This default account behavior is consistent with Debian. In order to connect to a switch using the root account, you can do one of two things for the account:

  • Generate an SSH key

  • Set a password

Generating an SSH Key for the root Account

  1. First, in a terminal on your host system (not the switch), check to see if a key already exists:

    root@host:~# ls -al ~/.ssh/

    The key is named something like, or

  2. If a key doesn’t exist, generate a new one by first creating the RSA key pair:

    root@host:~# ssh-keygen -t rsa
  3. A prompt appears, asking you to Enter file in which to save the key (/home/root/.ssh/id_rsa):. Press Enter to use the root user’s home directory, or else provide a different destination.

  4. You are prompted to Enter passphrase (empty for no passphrase):. This is optional but it does provide an extra layer of security.

  5. The public key is now located in /home/root/.ssh/ The private key (identification) is now located in /home/root/.ssh/id_rsa.

  6. Copy the public key to the switch. SSH to the switch as the cumulus user, then run:

    cumulus@switch:~$ sudo mkdir -p /root/.ssh
    cumulus@switch:~$ echo <SSH public key string> | sudo tee -a /root/.ssh/authorized_keys

Setting the root User Password

  1. Run:

    cumulus@switch:~$ sudo passwd root
  2. Change the /etc/ssh/sshd_config file’s PermitRootLogin setting from without-password to yes.

    cumulus@switch:~$ sudo nano /etc/ssh/sshd_config
    # Authentication:
    LoginGraceTime 120
    PermitRootLogin yes
    StrictModes yes
  3. Restart the ssh service:

    cumulus@switch:~$ sudo systemctl reload ssh.service