Monitor System Inventory

In addition to network and switch inventory, the Cumulus NetQ UI provides a view into the current status and configuration of the software network constructs in a tabular, networkwide view. These are helpful when you want to see all data for all of a particular element in your network for troubleshooting, or you want to export a list view.

Some of these views provide data that is also available through the card workflows, but these views are not treated like cards. They only provide the current status; you cannot change the time period of the views, or graph the data within the UI.

Access these tables through the Main Menu (), under the Network heading.

Tables can be manipulated using the settings above the tables, shown here and described in Table Settings.

Pagination options are shown when there are more than 25 results.

View All NetQ Agents

The Agents view provides all available parameter data about all NetQ Agents in the system.

ParameterDescription
HostnameName of the switch or host
TimestampDate and time the data was captured
Last ReinitDate and time that the switch or host was reinitialized
Last Update TimeDate and time that the switch or host was updated
LastbootDate and time that the switch or host was last booted up
NTP StateStatus of NTP synchronization on the switch or host; yes = in synchronization, no = out of synchronization
Sys UptimeAmount of time the switch or host has been continuously up and running
VersionNetQ version running on the switch or host

View All Events

The Events view provides all available parameter data about all events in the system.

ParameterDescription
HostnameName of the switch or host that experienced the event
TimestampDate and time the event was captured
MessageDescription of the event
Message TypeNetwork service or protocol that generated the event
SeverityImportance of the event. Values include critical, warning, info, and debug.

View All MACs

The MACs (media access control addresses) view provides all available parameter data about all MAC addresses in the system.

ParameterDescription
HostnameName of the switch or host where the MAC address resides
TimestampDate and time the data was captured
Egress PortPort where traffic exits the switch or host
Is RemoteIndicates if the address is
Is StaticIndicates if the address is a static (true) or dynamic assignment (false)
MAC AddressMAC address
NexthopNext hop for traffic hitting this MAC address on this switch or host
OriginIndicates if address is owned by this switch or host (true) or by a peer (false)
VLANVLAN associated with the MAC address, if any

View All VLANs

The VLANs (virtual local area networks) view provides all available parameter data about all VLANs in the system.

ParameterDescription
HostnameName of the switch or host where the VLAN(s) reside(s)
TimestampDate and time the data was captured
If NameName of interface used by the VLAN(s)
Last ChangedDate and time when this information was last updated
PortsPorts on the switch or host associated with the VLAN(s)
SVISwitch virtual interface associated with a bridge interface
VLANsVLANs associated with the switch or host

View IP Routes

The IP Routes view provides all available parameter data about all IP routes. The list of routes can be filtered to view only the IPv4 or IPv6 routes by selecting the relevant tab.

ParameterDescription
HostnameName of the switch or host where the VLAN(s) reside(s)
TimestampDate and time the data was captured
Is IPv6Indicates if the address is an IPv6 (true) or IPv4 (false) address
Message TypeNetwork service or protocol; always Route in this table
NexthopsPossible ports/interfaces where traffic can be routed to next
OriginIndicates if this switch or host is the source of this route (true) or not (false)
PrefixIPv4 or IPv6 address prefix
PriorityRank of this route to be used before another, where the lower the number, less likely is to be used; value determined by routing protocol
ProtocolProtocol responsible for this route
Route TypeType of route
Rt Table IDThe routing table identifier where the route resides
SrcPrefix of the address where the route is coming from (the previous hop)
VRFAssociated virtual route interface associated with this route

View IP Neighbors

The IP Neighbors view provides all available parameter data about all IP neighbors. The list of neighbors can be filtered to view only the IPv4 or IPv6 neighbors by selecting the relevant tab.

ParameterDescription
HostnameName of the neighboring switch or host
TimestampDate and time the data was captured
IF IndexIndex of interface used to communicate with this neighbor
If NameName of interface used to communicate with this neighbor
IP AddressIPv4 or IPv6 address of the neighbor switch or host
Is IPv6Indicates if the address is an IPv6 (true) or IPv4 (false) address
Is RemoteIndicates if the address is
MAC AddressMAC address of the neighbor switch or host
Message TypeNetwork service or protocol; always Neighbor in this table
VRFAssociated virtual route interface associated with this neighbor

View IP Addresses

The IP Addresses view provides all available parameter data about all IP addresses. The list of addresses can be filtered to view only the IPv4 or IPv6 addresses by selecting the relevant tab.

ParameterDescription
HostnameName of the neighboring switch or host
TimestampDate and time the data was captured
If NameName of interface used to communicate with this neighbor
Is IPv6Indicates if the address is an IPv6 (true) or IPv4 (false) address
MaskHost portion of the address
PrefixNetwork portion of the address
VRFVirtual route interface associated with this address prefix and interface on this switch or host