Cumulus NetQ 1.1
Cumulus NetQ is a fabric-wide, telemetry-based validation system, that enables organizations to validate network state, both during regular operations and for post-mortem diagnostic analysis. Running on Cumulus Linux switches and other certified systems - such as Ubuntu, Red Hat, and CentOS hosts - NetQ captures network data and other state information in real time, allowing cloud architects and network operations teams to operate with visibility over the entire network.
The system uses a three-pronged approach to validating networks:
NetQ easily validates potential network configuration changes in a virtualized environment or lab using check, show and trace algorithms, eliminating the need to check nodes one by one and reducing manual errors before they are rolled into production (one of the main causes of network downtime).
NetQ detects faulty network states that can result in packet loss or connectivity issues, and alerts the user with precise fault location data to allow for faster remediation, greatly improving network agility, and reducing downtime costs.
NetQ provides the ability to trace network paths, replay the network state at a time in the past, review fabric-wide event changelogs and diagnose the root cause of state deviations.
What’s New in NetQ 1.1.0
NetQ 1.1 includes the following new features and enhancements:
Improved container visibility: Docker Swarm integration provides service- and application-level insights in containerized environments.
Layer 1 support: checkMonitor your physical layer, check the status of the inventory, check peer connections and investigate link mismatches and flapping.
EVPN: Fabric-wide configuration checks and traces enhancements so you can verify that your overlay control plane is configured correctly.
NetQ Notifier: Filter alerts and notifications based on severity, device and service, and redirect to the desired PagerDuty and Slack channels. Also, exporting NetQ data to ELK and Splunk is now generally available.
Telemetry server: The telemetry server is now available as a KVM-based virtual machine, which runs on Ubuntu 16.04 and Red Hat Enterprise Linux 7.
Standalone repository: NetQ packages are in their own separate repository.
New check and show commands for more validation options.
NetQ 1.1.0 includes early access support for the following:
For further information regarding bug fixes and known issues present in this release, refer to the release notes.
NetQ comprises the following components:
The back-end Python agent installed on every monitored node in the network - including Cumulus Linux switches, Linux bare-metal hosts and virtual machines , or Docker containers. The agent pushes out data to the NetQ Telemetry Server periodically, and when specific
netlinkevents occur. The agent monitors the following objects via
address (IPv4 and IPv6)
route (IPv4 and IPv6)
IP neighbor (IPv4 and IPv6)
Further, every 15 seconds, it gathers data for the following protocols:
Bridging protocols (LLDP, STP, MLAG)
Routing protocols (BGP, OSPF)
Network virtualization (LNV, VXLAN data plane)
It also listens to the Docker event stream to monitor Docker containers running on a host and gathers container networking information such as NAT translations, networks and container IP and MAC addresses.
NetQ Telemetry Server
The database/key-value store where all network information sent from NetQ Agents running on the network is collected, aggregated and queried from.
NetQ Analysis Engine
The NetQ Analysis Engine is the backend engine utilized when querying NetQ via the CLI, service console, or notifier. The engine has two parts:
The NetQ Agent Command Line Interface. The NetQ CLI can be used on every node and can be used on the NetQ Telemetry Server through
The NetQ Notifier. The notifier runs on the telemetry server. It responds to events pushed by the NetQ Agent, sending alerts to a configured channel, such as Slack, PagerDuty or
NetQ Service Console
The Service Console provides a browser-based window for accessing the NetQ CLI from anywhere.