Upgrading from Quagga to FRRouting
Cumulus Linux 3.4 and later releases replace Quagga with FRRouting. This section outlines the upgrade process for users currently using Quagga.
These instructions only apply to upgrading to Cumulus Linux 3.4 or later from releases earlier than 3.4. New image installations contain
frr instead of
quagga-compat. If you are using any automation tools to configure your network and are installing a new Cumulus Linux image, make sure your automation tools refer to FRR and not to Quagga.
If you are upgrading Cumulus Linux using
apt-get upgrade, existing automation that references Quagga continues to work until you upgrade to FRR. Once you perform the following upgrade steps, your automation must reference FRR instead of Quagga.
Upgrading to Cumulus Linux 3.4 or later results in both
frr.service being present on the system, until
quagga.service is removed. These services have been configured to conflict with each other; starting one service automatically stops the other, as they cannot run concurrently.
Run the following commands to begin the upgrade process:
cumulus@switch:~$ sudo -E apt-get update cumulus@switch:~$ sudo -E apt-get upgrade
At the end of the
apt-get upgrade process, the output shows details of the upgrade process, regarding the Quagga to FRR switchover.
Unpacking quagga-compat (1.0.0+cl3u15-1) ... Selecting previously unselected package frr. Preparing to unpack .../frr_3.1+cl3u1_amd64.deb ... Unpacking frr (3.1+cl3u1) ... Processing triggers for man-db (22.214.171.124-5) ... Setting up frr (3.1+cl3u1) ... Setting up quagga-compat (1.0.0+cl3u15-1) ... +-----------------------------------------------------------------------------+ | Your system has been upgraded to use Cumulus Linux's new routing protocol | | suite, FRRouting. The 'quagga' package is now a dummy transitional package | | and may be removed. | | | | As part of this upgrade, please take note of the following information: | | | | - The location of your configuration files has changed to /etc/frr. | | In order to enable a seamless transition, FRRouting will continue to | | read all configuration files from /etc/quagga until the transition is | | completed. | | | | - In the interest of stability, action is required on your part to | | complete the transition to FRRouting. For instructions on how to do | | this, please refer to the Cumulus Linux documentation. | +-----------------------------------------------------------------------------+ Setting up quagga (1.0.0+cl3u14-1) ... Processing triggers for libc-bin (2.19-18+deb8u10) ... Creating post-apt snapshot... 245 done. root@dell-s6000-16:/etc#
After the upgrade process is completed, the switch is in the following state:
cumulus@switch:~$ sudo systemctl list-unit-files | grep "quagga\|frr" rr.service enabled quagga.service enabled cumulus@switch:~$ sudo systemctl status frr ● frr.service - Cumulus Linux FRR Loaded: loaded (/etc/systemd/system/frr.service; enabled) Active: inactive (dead) since Fri 2017-07-28 18:54:59 UTC; 3 days ago cumulus@switch:~$ sudo systemctl status quagga ● quagga.service - Quagga (Transitional) Loaded: loaded (/lib/systemd/system/quagga.service; enabled) Active: active (running) since Fri 2017-07-28 18:55:49 UTC; 3 days ago Process: 29436 ExecStop=/usr/lib/frr/quagga stop (code=exited, status=0/SUCCESS) Process: 29772 ExecStart=/usr/lib/frr/quagga start (code=exited, status=0/SUCCESS) CGroup: /system.slice/quagga.service ├─29791 /usr/lib/frr/zebra -s 90000000 --daemon -A 127.0.0.1 -q ├─29798 /usr/lib/frr/bgpd --daemon -A 127.0.0.1 -q ├─29805 /usr/lib/frr/ripd --daemon -A 127.0.0.1 -q ├─29812 /usr/lib/frr/ospfd --daemon -A 127.0.0.1 -q ├─29819 /usr/lib/frr/ospf6d --daemon -A ::1 -q └─29825 /usr/lib/frr/watchfrr -q -adz -r /usr/sbin/servicebBquaggabBrestartbB%s -s /usr/sbin servicebBquaggabBstartbB%s -k /usr/sbin/servicebBquaggabBstopbB%s -b bB -t 90 zebra bgpd ripd ospfdospf6d
The output below shows the FRR / Quagga package status:
cumulus@switch:~$ dpkg -l quagga\* frr\* interacting with quagga rc quagga 1.0.0+cl3u14-1 amd64 transitional package ii quagga-compat 1.0.0+cl3u15-1 all Quagga compatibility for FRRouting ii frr 3.1+cl3u1 amd64 BGP/OSPF/RIP routing daemon
Cumulus 3.4 and later releases do not support or implement
python-clcmd. While the package remains, the related commands have
To complete the transition to FRR:
vtysh.conffile should not be moved, as it is unlikely any configuration is in the file. However, if there is necessary configuration in place, copy the contents into
Merge the current
Quagga.conffile with the new
frr.conffile. Keep the default configuration for
frr.confin place, and add the additional configuration sections from
Enable the daemons needed for your installation in
Manually update the log file locations to
Remove the compatibility package:
This step stops the Quagga compatibility mode, causing routing to go down.
cumulus@switch:~$ sudo -E apt-get remove quagga quagga-compat quagga-doc
quagga-compatpackage also removes
/etc/quaggadirectory is not removed in this step, as it is left in place for reference.
Purge the Quagga packages:
cumulus@switch:~$ sudo dpkg -P quagga quagga-compat
This step deletes all Quagga configuration files. Please ensure you back up your configuration.
Cumulus Networks does not recommend reinstalling the
quagga-compatpackages once they have been removed. While they can be reinstalled to continue migration iterations, limited testing has taken place, and configuration issues may occur.
Start FRR without Quagga compatibility mode:
cumulus@switch:~$ sudo systemctl start frr.service cumulus@switch:~$ sudo systemctl -l status frr.service
systemctl -l status frr output shows an issue, edit the configuration files to correct it, and repeat the process. If issues persist, you can return to Quagga compatibility mode for further testing:
cumulus@switch:~$ sudo -E apt-get install quagga-compat cumulus@switch:~$ sudo systemctl stop frr.service cumulus@switch:~$ sudo systemctl disable frr.service
Several configuration migration iterations may be necessary to ensure the configuration is behaving the same in both Quagga and FRR.
When further testing is complete, run the following commands to reset the FRR installation, and then repeat the steps from the beginning of this section to upgrade to FRR:
cumulus@switch:~$ sudo systemctl reset-failed frr.service cumulus@switch:~$ sudo systemctl enable frr.service